Yoke Grade 10 Clevis Sling Hook with Latch IS EN1677-1+2
- All Grade 10 lifting components sold by Chains Limited comply fully with the relevant section of IS EN1677, ASTM A952/A and DIN PAS 1061.
- The grade 10 components are forged from alloy steel, they are crack detected following heat treatment and finally proof tested to 2.5 times working load.
- The full compliance of these components means that they can be used in chain slings certified to IS EN 818-4, for use in a temperature range of -40°C up to 200°C without reduction in working load limit.
Specification
| Product Code | Chain Size mm |
A mm |
H mm |
K mm |
P1 mm |
T mm |
W.L.L. (t) |
Box Quantity |
Mass (kg) |
|---|---|---|---|---|---|---|---|---|---|
| X-043/S-06 | 6 | 6 | 23 | 79 | 23 | 15 | 1.4 | 40 | 0.3 |
| X-043/S-07 | 7/8 | 9 | 22 | 98 | 27 | 18 | 2.5 | 30 | 0.6 |
| X-043/S-10 | 10 | 11 | 30 | 122 | 34 | 24 | 4.0 | 15 | 1.2 |
| X-043/S-13 | 13 | 14 | 37 | 147 | 44 | 30 | 6.7 | 8 | 2.3 |
| X-043/S-16 | 16 | 17 | 42 | 166 | 48 | 39 | 10.0 | 6 | 3.9 |
| X-043/S-20 | 20 | 24 | 64 | 207 | 57 | 48 | 16.0 | 3 | 8.6 |
| X-043/S-22 | 22 | 25 | 61 | 217 | 73 | 52 | 19.0 | 2 | 8.6 |
Swipe horizontally on Specs Table to view all information.